 NP-10 H, NP-4 H, AK-20, BKS-420 and TORO 1020
Leather Skiving, Strip Cutting, and Splitting Machinery. A skiving machine is designed to bevel the edge of leather and rubber like textiles. these machines are production tools and widely used in the trades. Skiving machines are adjustable as to how deep they cut and at what angle is the cut. the distance of the bevel from the edge of the leather to the inside is also adjustable. Bell Knife Skivers include a clutch type self sharpening device and have an internal transmission to vary the cutting and feeding speeds.Most of the replaceable spare parts like knives, feed rollers and sharpening stones are interchangeable with several European and Japanese mad machines.
For Skiving the edges of leather in order to fold or
piece leather together. For Horn Wraps, Saddle
Work, Boots, Shoes, Apparel, Bags, etc.
Contact for additional information concerning your product application needs. |
NP-10 H
HEAVY DUTY POSITIVE TOP & BOTTOM FEED LEATHER SKIVING AND BEVELING MACHINE. For Skiving the edges of leather in order to fold or
piece leather together. For Horn Wraps, Saddle
Work, Boots, Shoes, Apparel, Bags, etc.
- For Positive Feed Skiving on Light to Extra Heavy Leathers.
- Gear driven Positive Top & Bottom Roller/Puller Feed System.
- Built-in Automatic Knife Sharpening and Adjustable Speed Control.
- For Saddle Makers, Boot & Shoe Makers and Professional Leather Crafter's.
- Skives up to 14 ounce Leathers in a Single Pass
|
NP-10 H |
NP- 4 H
STANDARD LEATHER SKIVING AND BEVELING MACHINE WITH SHARPENER. For Skiving the edges of leather in order to fold or
piece leather together. For Horn Wraps, Saddle
Work, Boots, Shoes, Apparel, Bags, etc.
The standard NP- 4 has a bottom feeder only and with multi-passes will bevel any edge. Includes a Built-in Bell Knife Sharpener and Speed Control System. |
NP- 4 H |
AK- 20
MULTI-KNIFE ROLLER FEED STRAP, BELT, AND STRIP CUTTING MACHINE. Capable of cutting up to 13 adjustable widths of leather, rubber, paper cardboard, or other materials. The machine cuts any length up to 3/8" thick with a 14" wide cutting capacity.
Machine comes with:
20 - 18mm spacers
1 - 10mm spacer
10 - 4mm spacers
10 - 3mm spacers
10 - 2mm spacers
8 - knives (80mm dia. x 40mm hole x 1mm width) and other accessories. |
AK- 20
SHOWN WITH OPTIONAL
CASTER WHEELS |
BKS - 420 BAND KNIFE SPLITTER
BKS-420 is a 16" Automatic Band Knife Splitter with Dust Collector.
-
Max split thickness 8 mm or 5/16"
-
Min split thickness 1/32"
-
Feed rate up to 30 feet per minute
-
220 Volt 3 phase.
| 
BKS - 420 |
TORO 1020
This is a new 20" wide leather splitting machine. The knife blade is stationary and the leather feeds over the very sharp knife blades to uniformly split your skins or to even out any high spots. Several adjustments are possible. The machine feeds very slowly and is fairly accurate. This Artisan Splitter is designed for the leather smith in a small shop. This model is not designed for high production but, is for the saddle maker, harness maker or leather crafter who needs an affordable simple wide splitter.
Contact for additional information concerning your product application needs. | 
TORO 1020 |
100 - B and 200 - 2 B CLICKER
100- B CLICKER 10 Ton Hydraulic Die Cutting Machine used to cut small parts out of Leather, Vinyl, Rubber, Paper, Plastic, Wood Paneling, Canvas, Light Metals and many additional types of materials. A custom "Die" is place over the leather or material, the swinging cutter arm is placed over the die, then the two handle switches are depressed and the arm punches the die through the leather or other material to cut out a perfect pattern every time.
200- 2 B CLICKER 20 Ton Hydraulic Die Cutting Machine. The swing are is designed to pivot over the cutting bed and is 15" by 20". Some features of the machine are the
safety, power on and starting switches,
adjustable stroke height controls, adjustable
time delay settings for the cutting
head and a digital voltage monitor.
New machines are shipped including the necessary 12.5 gallons of hydraulic oil.
Custom made Dies are ordered separately
and are not included.
Several sizes of optional cutting boards
are available.
Contact for additional information concerning your product application needs. |
100 B Clicker
10 TON HYDRAULIC CLICKER
The model 100- B Clicker is a 10 Ton Hydraulic Die Cutting Machine used to cut small parts out of Leather, Vinyl, Rubber, Paper, Plastic, Wood Paneling, Canvas, Light Metals and many additional types of materials.
Features:
- 760mm X 400mm Cutting Board.
- Dual Button "Dead Man" Starting Switches.
- 12.5 Gallons Hydraulic Oil Capacity.
- Solid State Circuitry.
- Roller Wheels for Moving the Machine.
- 220 volt, Single Phase 50/60 HZ.
- Net Weight (less oil) 1450 Lbs.
- Shipping Weight 1500 Lbs.
| 
100 B |
200 - 2 B Clicker
20 TON HYDRAULIC CLICKER
The model 200 - 2 B Clicker is a 20 Ton Hydraulic Die Cutting Machine used to cut small parts out of Leather, Vinyl, Rubber, Paper, Plastic, Wood Paneling, Canvas, Light Metals and many additional types of materials.
Features:
- 900mm X 450mm Cutting Board.
- Dual Button "Dead Man" Starting Switches.
- 12.5 Gallons Hydraulic Oil Capacity.
- Solid State Circuitry.
- Adjustable Floor Leveling Feet.
- Roller Wheels for Moving the Machine.
- 220 volt, Single Phase 50/60 HZ.
- Net Weight (less oil) 1350 Lbs.
- Shipping Weight 1500 Lbs.
|
200 - 2 B Clicker |
Store, click here.