TORO 3000, and TORO 4000 series machines are Compound Needle Feed, Walking Foot Cylinder Bed Lockstitch Sewing Machines. The stitchers are designed to sew medium-heavy to extra heavy weight products with an adjustable stitch length regulator, oscillating shuttle, and a reverse feed mechanism.

All of the models use the same #794 needles, bobbins and replaceable spare parts. The heavy stitchers are designed to sew from a very short stitch length, up to 2 stitches per inch or about 12mm long.

Most of these machines are for stitching on medium-heavy to extra heavy leathers such as saddles, harness, heavy and light tack, chaps, chinks, cases and bags. Manufactures are currently using these models for sewing a decorative stitch on highly decorative fashion denim Jeans.

Others are utilizing the TORO series for stitching specialty filters, anti-mine apparel, flack jackets, small arms protection vests and blankets. Some use the TORO-4000 series for producing high temperature blankets to keep industrial machinery warm in extreme climates.

Contact for additional information concerning your product application needs.

TORO 3000
TORO 3000 The first affordable real holster, harness, chap, saddle and light/medium to extra heavy leather stitching machine for both professional and novice leather crafter's. All TORO 3000 leather stitchers include our custom EP pedestal drive unit with a 110 volt ACF 500C DC electronic servo motor with an SR-2 speed controller.

• Sews up to 3/4" of Leather.
• Extra Heavy Duty 9" Long Cylinder.
• Sews Size 138 up to 346 Thread.
• Recommended Needle: Schmetz 794.
• Sews Forward and Reverse by Lever Operation.
• Presser Foot Lift: 1 1/16".
• Traditional Style Bobbin Winder.
• Halogen Lamp.
• Maximum Stitch Length: 3 Stitches per inch.
• Maximum Sewing Speed: 150 SPM.

TC- 0818
TC- 0818 Flat Bed Work Platform

Optional Flat Bed Work Platform for either a TORO-3000 or TORO-4000 Model

Shown with TORO-3000 SOLD Separately

TORO 4000 R Extra Heavy Duty Cylinder Arm, Compound Needle Feed, Walking Foot Harness & Leather Stitcher with 16 1/2 " Long Cylinder Arm.

• Sews up to 3/4" of Leather.
• 16 1/2" Long Cylinder.
• Built in Bobbin Winder.
• Sews Size 138 up to 346 Thread.
• Sews Forward and Reverse by Lever Operation.
• Foot Operated Presser Foot Lift to 1 1/16 inches.
• Stitch Length up to 10 mm Long.
• Quiet and Reliable Production Performance.
• Available with either Our EP pedestal motor drive unit or our heavier duty Ped-600 motor drive.

TORO 4000 LA-25, TORO 4000 LA-37, TORO 4011 LA-37

models TORO 4000 LA-25, TORO 4000 LA-37, TORO 4011 LA-37 series machines are Heavy Duty Long Arm Cylinder Bed Lockstitch Sewing Machines. The stitchers are designed to sew heavy weight products with an adjustable length stitch regulator, oscillating shuttle, and a reverse feed mechanism. All models use the same #794 needles and bobbins. The heavy stitchers are designed to sew from a very short stitch length up to 3 stitches per inch.

The TORO-4000 LA stitchers are intended for stitching on medium-heavy to extra heavy weight textiles and leathers such as golf bags, saddle pads and blankets. The long arm machines are also used for stitching high temperature blankets to keep industrial machinery warm in extreme climates and for stitching and quilting very large ordnance protective blankets and shields. TORO 4000 LA-37 and TORO 4011 LA-37 are available only with the LA-37 Pedestal system. TORO 4000 LA-25 is only available with the Extra Heavy Duty Pedestal system.

Contact for additional information concerning your product application needs.

TORO 4000 LA-25 The Professional model TORO-4000 LA-25 has a SUPER LONG 25 " working area and is intended for heavy production sewing. This machine is a Compound Needle Feed Walking-Foot Stitching Machine designed to sew Leather, Webbing, Canvas, Filters and any Heavy Fabrics from about 1/16" up to 7/8" thick with an adjustable stitch length lever and reverse feed for back-tacking. This top-of-the-line TORO model is manufactured to the highest quality standards for continuous production sewing.

• Cylinder arm with Large Shuttle Hook.
• Most spare parts are interchangeable with the "Juki" brand model TSC-461.
• Many special optional needle plates and presser feet are available.
• Available only with the LA-25 Extra Heavy Duty Pedestal system.

TORO 4000 LA-37
TORO 4000 LA-37 The Professional model TORO-4000 LA-37 has a SUPER LONG 37" working area and is intended for heavy production sewing. This machine is a Compound Needle Feed Walking-Foot Stitching Machine designed to sew Leather, Webbing, Canvas, Filters and any Heavy Fabrics from about 1/16" up to 7/8" thick with an adjustable stitch length lever and reverse feed for back-tacking. This top-of-the-line TORO model is manufactured to the highest quality standards for continuous production sewing.

• Cylinder arm with Large Shuttle Hook.
• Available only with the LA-37 pedestal system.
• Most spare parts are interchangeable with the "Juki" brand model TSC-461.
• Many special optional needle plates and presser feet are available.

TORO 4011 LA-37
The TORO-4011 LA-37 is another HEAVY DUTY 37" Long Arm Cylinder-Bed machine, but it sews "UP-THE-ARM". The machine sews from the end of the cylinder towards the hand wheel. Most machines sew from front to rear of the machine away from the operator. The TORO 4011 LA-37 with its 37" cylinder arm is designed to stitch left to right from the end of the cylinder towards the hand-wheel. In reverse the machine sews off-the-arm. The TORO-4011 LA-37 is a Drop Feed Long Arm Lockstitch Machine. It is not a walking foot system.

Will sew up to 5/8" of material for items such as golf bags, luggage, bags, tents, sails, parachutes, umbrellas and other products where transverse (sideways) stitching is necessary.

SPECIAL ORDER.

• Maximum sewing speed: 800 SPM.
• Maximum stitch length: 7.5 mm.
• Sews with up to size 415 thread.
• Large barrel oscillating shuttle hook system.
• Maximum presser foot lift: 3/4" .
• Recommended needle: Schmetz 794.
• Available only with the LA-37 pedestal system.

TORO 4600 & 4700

TORO 4600 & 4700 Very Heavy Duty Walking Foot, Drop Feed Flatbed Leather Stitching Machine with Reverse.

The quality TORO 4600 & 4700 series flat bed sewing machines are designed to stitch from medium heavy to extremely heavy fabrics and leathers. The machines are built for stitching all types and weights of Webbing, Canvas, Bio-Plastics, Leather and coated fabrics for such products as slings, straps, belting, tie down anchor ropes, tents, awnings, filters, cases, tarpaulins and luggage.

The TORO 4600 & 4700 models are normally installed on a heavy duty motor drive unit which includes lockable caster wheels, our heavy duty plywood core table top, adjustable heavy duty double "T" style legs, halogen lamp, SR-2 speed controller, ACF 500C D.C. electronic servo motor and accessories.

For ergonomic comfort and efficiency, the table top height is fully adjustable for sitting or standing. The system includes our energy saving two speed 400 watt ACF 500C D.C. Electronic Servo Motor and is available for either 110 or 220 volt single phase electricity.

The TORO 4600 & 4700 system offers stitchers the ability to sew one stitch at a time, stitch by stitch, or up to a safe and controllable sewing speed of 400 stitches per minute. Changing to the larger of the two pulleys on the SR-2 controller and the high speed setting of the ACF 500C Servo Motor raises the maximum available sewing speed up to about 800 stitches per minute. The TORO 4600 & 4700 drop feed walking foot lockstitcher has a large Titanium coated barrel shuttle.

Contact for additional information concerning your product application needs.

TORO 4600

The 4600 Extra Heavy Duty 16 1/2" working area flat bed Drop Feed Walking Foot Stitcher sews up to 5/8" thick. The machine has a reverse lever for back stitching and is a 7 class style oscillating shuttle hook. This machine is a workhorse for heavy, dense textiles.

TORO 4700

The is also a Extra Heavy Duty flat bed Drop Feed Walking Foot Stitcher with a 16 1/2" working area, this model sews up to 1".

Both models offer:

• Built-in Bobbin Winder.
• Will sew from size #69 bonded thread up to the heaviest #6 cord thread size #415.
• We recommend using quality Schmetz brand needles number 794.
• Foot Operated Presser Foot Lift to 1.2 inches.
• Stitch Length: from 0 to 2 Stitches per inch.
• Quiet and Reliable Production Performance.

TORO 4600 and

TORO 4700

618-1 LTHR

618-1 LTHR This machine is know as a Compound Needle Feed Walking Foot Sewing machine. Designed to stitch upholstery type fabrics, leather and threads. The purpose of a compound needle feed walking foot machine is to sew two or more layers of fabric or leather with an equal distance stitch length and to greatly reduce the chance of ply slippage. This is the most popular sewing system for the automobile and furniture upholstery.

The 618-1 LTHR is recommended for stitching light to medium-heavy leather. One would choose this style of stitcher for sewing chaps, chinks, head stalls, lighter weight harness, heavy draperies, canvas products webbing, tents, awnings, belting hand bags, cases, wallets, cell phone cases, checkbooks covers, book jackets, and all manner and kinds of products from the thickness of a sheet of paper up to 7/16" of heavy leather and thread up to size #207.

The 618-1 LTHR is a very adaptable model that can be adjusted within its limitations to sew just about any known textile.

Contact for additional information concerning your product application needs.

618-1 SC LTHR
The Leather Stitching Machine is designed and adjusted specifically to stitch on vegetable tanned leathers and to produce a completely uniform and equal distance stitch length. The 618-1 LTHR will stitch from light buckskin or elk skin up to several layers of leather measuring up to 7/16". Maximum sewing speed up to 800 spm.

• Compound Needle Feed, Walking Foot Machine.
• Large rotary Hook and "M" size Big Bobbin.
• Unique Presser Foot System.
• Reverse Feed.
• Automatic Lubrication with Pressure Oil Pump & Alloy Pan.
• Maximum Stitch Length 3.75 per inch.
• Maximum Presser Foot Lift 9/16 inch.
• Speed reducer.

1797 AB LTHR, 797 AB 8001 LTHR and 797 AB NS LTHR

The 797 LTHR series Are machines known as a Drop Feed Walking Foot Sewing machine with an internal automatic lubrication system (pump type). The 797 LTHR series are designed to stitch lighter weight upholstery type fabrics, and leather with heavier threads. The 797 LTHR series are smoother to operate, much quieter than other walking foot machines and will sew up to 3/8" of leather or textiles.

The 797 LTHR series uses alternating presser foot walking foot machine to sew two or more layers of fabric or leather with an equal distant stitch length and to greatly reduce the chance of ply slippage. The 797 LTHR series are more popular in Europe and Asia for automobile and furniture upholstery and this type of machine system is easier to learn to sew with and is not as costly as a compound stitcher.

The 797 LTHR series is recommended for stitching light to medium weight leathers and fabrics. One would chose The 797 LTHR series of walking foot sewing machines to stitch leather gloves, leather jackets, and garments, chaps, chinks, jeans, draperies, lighter canvas products, light webbing, light weight tents, awnings, belting, wallets, check book covers, book jackets upholstery and leather products from a thickness of a piece of paper up to 3/8" in overall thickness.

Contact for additional information concerning your product application needs.

797 AB-8001 LTHR, A Very High Quality Walking Foot, Adjustable Height Presser Foot Walking Device to Climb over Heavy Obstacles, Front Foot Lifter. New and Improved Model of 797 AB Leather Stitching Machine Drop Feed Leather Stitching Machine with a Big "M" Bobbin Rotating Hook, Including an Automatic Oil Lubrication System with Reverse Feeding for Back-Tacking. For Sewing: Chaps, Chinks, Belts, Holsters, Check Book Covers, Wallets, Day Planners, Vests, etc.

Very similar to the NS in features, except the machine casting is longer providing 13" from the needle to the right edge and the machine is also taller with an additional 1" from the base to the horizontal arm of the machine.

• The Machine Sews Leather more than 3/8" and has a 5/8" Presser Foot Lift.
• The Maximum Thread up to size 138.
• New style front presser foot lifter and a dial adjustment for the presser foot walk height.
• A Dial Type Stitch Length Regulator Adjusts to 3.5 stitches per inch.
• Optional Presser Feet are Available.
• Controllable Stitching Speeds up to 190 SPM when included with the Artisan SR-2 Speed Reducer.
• Recommended Needle: Schmetz 135 x 16 #18 to #24 TRI Or Changeable to 190 R style needle.

5550 BIG LTHR

The 5550 BIG LTHR Single Needle Lockstitch machine with a drop feed mechanism are the most common type of sewing machine. This style is also the most prevalent type of machine used in both apparel production and in the dressmakers shop or in the alteration room. The 5550 BIG LTHR has a rotating hook with a fully automatic pump lubrication system and include a lever for back tacking or stitching in reverse, and a dial operated stitch length system and needle bearing link type take-up lever.

Contact for additional information concerning your product application needs.

5550 BIG LTHR
5550 BIG LTHR The Leather model includes a roller presser foot and gauge set. The roller presser foot helps the operator to follow an exact stitching line and to make quick and sharp turns for decorative stitching on boot tops, construction of boots and shoes and stitching light to medium leather and light upholstery textiles. With a "M" size bobbin, the operator is able to sew for longer intervals between bobbin changes.

• Recommended Needle: Schmetz 135 x 8 #10 to #24 leather point.
• Single Needle Lockstitch.
• Reverse Feed Lever.
• Automatic Lubrication.
• "M" size Big Bobbin Rotating Hook.
• Large hole in needle plate.

4400 & 4420 LTHR Series

The 4400 & 4420 LTHR Series of heavier duty machines know as compound Needle Feed Walking Foot Sewing Machines. All of the machines are designed to stitch upholstery type fabrics, leather and heavier threads.

The purpose of a compound needle feed walking foot machine is to sew two or more layers of fabric or leather with an equal distant stitch length and to greatly reduce the chance of ply slippage. In North America, this is the most popular sewing system for automobile and furniture upholstery.

The 4400 & 4420 LTHR Series is also recommended for stitching light to medium-heavy leathers. One would choose this style of stitcher for sewing banners, tarpaulins, canvas products, webbing, tents, awnings, belting, hand bags, cases, and all manner and kind of products from the thickness of a sheet of paper up to almost 7/16" of textiles and thread up to size #207 or lager with special adjustments.

The standard models include a fully automatic lubrication system and sew up to 2200 spm on upholstery fabrics. All of the 4400 & 4420 LTHR Series machines use a large Bobbin, Horizontal Axis Rotating Hook with a "U" size bobbin.

Contact for additional information concerning your product application needs.

4400 RB LTHR
4400 RB LTHR, A single needle machine including a "Safety Clutch" mechanism designed to protect the machine from possible damage should the sewing machine "jam" from a thread lock-up or a broken needle strike the rotating hook point. Very Heavy Duty Compound Needle Feed, Walking Foot Upholstery sewing machine, with extra large drop-in bobbin.

• Interchangeable Presser Feet with Singer 111W, 211W, Consew 255RB, Juki LU-563 and others.
• Reverse Feed.
• Automatic Lubrication.
• Speed Reducer.
• Fully Automatic Lubrication with Pressure Oil Pump & Alloy Oil Pan.
• Double Capacity Rotating Hook, Drop-in Bobbin, Vertical Axis.
• 5/8 inch (16mm) Maximum Foot Lift.
• Extra Long 36mm Needle Stroke.
• Maximum Stitch Length is up to 3 stitches per inch.

4420 RB LTHR
4420 RB LTHR A double needle lock stitch machine including a "Safety Clutch" mechanism designed to protect the machine from possible damage should the sewing machine "jam" from a thread lock-up or a broken needle strike the rotating hook point. Very Heavy Duty Compound Needle Feed, Walking Foot Upholstery sewing machine, with extra large drop-in bobbin.

• Interchangeable Presser Feet with Singer 112W139, 212U539, Consew 339RB, Juki LUH521 and others.
• Reverse Feed.
• Fully Automatic Lubrication with Pressure Oil Pump & Alloy Oil Pan.
• Double Capacity Rotating Hooks, Drop-in Bobbin, Vertical Axis.
• 5/8 inch (16mm) Maximum Foot Lift.
• Extra Long 36mm Needle Stroke.
• Maximum Stitch Length is up to 3 stitches per inch.
• Standard 1/4" or 3/8" Needle Gauge. Other sizes optional.

4400-25 LTHR
4400-25 LTHR Very Heavy Duty Compound Needle Feed, Walking Foot with Extra Large Drop-in Bobbin, Reverse Feed and Automatic Lubrication.

• 25" Long Working Area including a "Safety Clutch" mechanism.
• Interchangeable Presser Feet with Singer 111W, 211W, Consew 255RB, Juki LU-563 and others.
• Manual lubrication system.
• Double Capacity Rotating Hook, Drop-in Bobbin, Vertical Axis.
• 5/8 inch (16mm) Maximum Foot Lift.
• Extra Long 36mm Needle Stroke.
• Maximum Stitch Length is up to 3 stitches per inch.

4420-25 LTHR
4420-25 LTHR Very Heavy Duty Compound Needle Feed, Walking Foot with Extra Large Drop-in Bobbin, Reverse Feed. 4420-25 LTHR includes a "Safety Clutch" mechanism.

• 25" Long Working Area.
• 1/4" Gauge Standard. Other gauges are optional.
• Interchangeable Presser Feet with Singer 112W139, 212U539, Consew 339RB, Juki LUH521 and others.
• Manual lubrication system.
• Double Capacity Rotating Hook, Drop-in Bobbin, Vertical Axis.
• 5/8 inch (16mm) Maximum Foot Lift.
• Extra Long 36mm Needle Stroke.
• Maximum Stitch Length is up to 3 stitches per inch.

2618-1B LTHR

The 2618-1B "Cylinder-Bed" Lockstitch machines are normally used in the production of hand bags, purses, footwear, upholstery, caps, and orthopedic products.

The 2618-1B Cylinder Bed sewing machines are mostly used to reach into smaller places where a flat bed sewing machine is just not practical. This model is a Compound Needle Feed Walking Foot with Reverse feed. Uses a Big bobbin Rotating Hook and a size "M" bobbin.

On top of the The 2618-1B is a dial operated knob. When turned from a smaller number to a large number, the step of the presser foot is increased. This feature causes the machine to step up to an obstacle and then to walk over the seam or welt cord or obstacle. The presser feet lifting lever is placed on the front of the machine making lifting the feet by hand far simpler than pervious models.

Contact for additional information concerning your product application needs.

2618-1B LTHR
The 2618-1B LTHR leather model is designed to stitch any type of leather with a quality stitch formation and without damaging the leather in any way. The 2618-1B LTHR sews from a piece of paper thickness up to a little over 3/8" of leather compressed. The machines will easily sew from size 33 up to 207 threads.

The 2618-1B LTHR Cylinder Arm Compound Needle Feed, Walking Foot Sewing Machine mechanism reduces ply slippage and produces equal distant stitches on automotive upholstery, leather, webbing, and heavy products. The 2618-1B is primarily designed for auto trimmers, artisans, leather-crafter's, upholsters, and industrial sewing operations. We recommend the machine for sewing light to medium-heavy weight leathers and upholstery type fabrics.

• Walking Foot Machine with Standard Interchangeable 111W Presser Feet.
• Reverse Feed.
• Adjustable Height Presser Foot Walk Device to Climb over Heavy Obstacles.
• Large Rotary Hook and "M" Size Big Bobbin.
• Drop-in Large Bobbin.
• Sewing speed up to 1,800 spm.
• Sews up to 3/8" thickness of Leather or Fabrics.
• Standard needle sizes 135x18 or 135x23
• Manual Lubrication with Oil Reservoir to Lubricate the Rotating Hook.
• Extremely Quiet and Reliable Operation.
• Maximum Stitch Length 6mm.
• Handles thread up to 207.

2698-1 LTHR

2698-1 is a Cylinder-Bed, Compound Needle Feed, Walking Foot “Scuff” Feed Machine with a “L” size Bobbin and Rotating Hook. Synchronized Binder System, Reverse Feed for Back-Tacking. The Machine Sews up to 3/8” with a 9/16” high presser foot lift. Available with the EP Pedestal Motor Drive Unit and SR-2 Speed Reducer. For Stitching: Binding on Hats, Bags, Wallets, Webbing, Canvas, Boots and Shoes and many other products. The machine is designed to apply tape or ribbon binding to the edge of fabrics.

• Sews Thread from size Z-33 to Z-138.
• Recommended Needle: Schmetz 135 x 16 #18 to #23 TRI
• PFAFF STYLE FITTINGS.
• Built-in Bobbin Winder.

5110 LTHR, 5120 LTHR and 6191 LTHR Series

The 5110, 5120 and 6191 LTHR are "Post Bed" style lockstitch machines normally used in the production of footwear, upholstery, caps, and orthopedic products. In today's world many are using post bed sewing machines for decorative stitching on western boot tops as well as assembly of boots and shoes. Others use the machines for the assembly of ball caps, pillows and cushions.

The 5110, 5120 and 6191 LTHR are High quality sewing machines designed for a full day of production sewing of: Upholstery, Canvas, Tarps, Leather, Denim, Nylon or other heavy fabrics.

Contact for additional information concerning your product application needs.

5110 LTHR
The 5110 is a simple to operate single needle post bed lockstitch machine with a 7" tall post, a roller presser foot and a drop feed system with a feed dog. The machine is an updated modern style with a dial type stitch regulator and ha a level operated reverse mechanism for back tacking. Many of the spare parts are interchangeable with a Singer model 51 class.

5120 LTHR
The 5120 is a simple to operate "double" needle post bed lockstitch machine with a 7" tall post and a drop feed system with a feed dog. . The roller type presser foot is mounted to the left side of the needles. The machine is an updated modern style with a dial type stitch regulator and has a level operated reverse mechanism for back tacking. Several needle gauges are optionally available.

Both machines offer:

• 7 Inch High Post Bed with Reverse.
• Standard Size Rotary Hooks and Roller Presser feet.
• Needle Bar Stroke 33.4mm, Take-up Lever Stroke 61.5mm.
• Presser Foot Lift, 10mm on 5110 and 7.5mm on 5120 models.
• Manual Lubrication System.
• Optional gauges are 2.4mm and 4.0mm, Others at additional cost.

29-273 BB LTHR, 29-172 LTHR Series

The "Cylinder-Bed", Universal Feed Patching and Stitching Machine. The feed system rotates 360 degrees and the machines will sew in a circle or one can sew a right angle turn without pivoting the fabric. Of course one can sew in a straight line too. Originally the style sewing machines was designed to repair rips, tears and open seams in shoes and boots. The machines became known as a "patcher" for obvious reasons.

Today this style of machine is still used for repairs, and one or more can be found in almost every shoe repair shop known. Many people also use a "patcher" to sew on appliques, embroidered Emblems and patches on garments without first opening up the sleeve seam. "Patcher's" have many many uses.

However "patcher's" are not Harness stitchers and will only sew up to about 1/4" of thickness. Because 29 class machines feed with the presser foot and have "teeth" on bottom of the foot, marks are left on soft leathers. Of course, the stitch length is easily adjustable.

Professionals such as Saddle makers, boot and shoe makers, auto trimmers, upholsters, sail makers, hobbyist and people that need to sew bulky or cylindrical fabrics with a 18" stitching area choose the 29 series when only the finest quality stitching performance is acceptable.

Contact for additional information concerning your product application needs.

29-172 LTHR
The 29-172 is known as a Short Arm Single Needle Lockstitch, Universal Feed Sewing machine with an 12 1/2" long Cylinder Arm and a small bobbin Oscillating Shuttle. The 29-172 machine has a long needle bar stroke and will sew up to 1/4" of leather or fabrics. As with all Universal feed machines the feeding presser foot turns in 360 degrees which allows the machine to sew in any direction.

The 29-172, sewing area up to approximately 12". Cylinder width 7/8". The extra large balance wheel can be mounted either on the end of the main shaft or on the front of the machine. Available with the Artisan EP Pedestal Motor Drive Unit and SR-2 Speed Controller. Recommended Needle: Schmetz 135 x 16 #11 to #23 Standard #18

29-172 series machines are designed and manufactured to quietly and smoothly stitch smaller sized leather, canvas, nylon, webbing, belts, tack, harness, and other types of heavy and light duty industrial and consumer products including stitching on patches and emblems on shirts and jackets.

29-273 BB LTHR
The 29-273 is known as a Long Arm Cylinder Bed, Universal Feed Patching machine. This model has a large bobbin and the cylinder are is 18" in length. All the features of the long arm machine are similar to the short arm except for the length of the cylinder and that the bobbin in this model is larger and holds more thread. Sews up to 1/4" leather with a 9/16" high presser foot lift. The29-273 BB series machines have a long needle bar stroke.

The 29-273 the extra large balance wheel can be mounted either on the end of the main shaft or on the front of the machine. Sewing area up to approximately 18". Cylinder width 1 5/32". Available with the Artisan EP Pedestal Motor Drive Unit and SR-2 Speed Controller. Other Sub Classes are Available. Recommended Needle: Schmetz 135 x 16 #14 to #24 Standard #22. Cylinder width 1 5/32".

29-273 BB series machines are designed and manufactured to quietly and smoothly stitch smaller sized leather, canvas, nylon, webbing, belts, tack, harness, and other types of heavy and light duty industrial and consumer products.

• The stitch length is adjustable up to a long length of 3.7 stitches per inch.
• Sewing speed up to 500 spm.
• Presser Foot Lift by hand 10.5 mm.
• Long Needle Bar Stroke.