618-1 SC, 618-1 D2

618-1 Series These machines are know as a Compound Needle Feed Walking Foot Sewing machines. Designed to stitch upholstery type fabrics, leather and threads. The purpose of a compound needle feed walking foot machine is to sew two or more layers of fabric or leather with an equal distance stitch length and to greatly reduce the chance of ply slippage. This is the most popular sewing system for the automobile and furniture upholstery.

The 618-1 Series are recommended for stitching light to medium-heavy leather. One would choose this style of stitcher for sewing chaps, chinks, head stalls, lighter weight harness, heavy draperies, canvas products webbing, tents, awnings, belting hand bags, cases, wallets, cell phone cases, checkbooks covers, book jackets, and all manner and kinds of products from the thickness of a sheet of paper up to 7/16" of heavy leather and thread up to size #207.

The 618-1 Series is a very adaptable model that can be adjusted within its limitations to sew just about any known textile.

Contact for additional information concerning your product application needs.

618-1SC
Compound Needle Feed, Walking Foot Sewing Machine. with Big "M" bobbin, Rotating Hook and Reverse Feed. This model includes a SAFETY CLUTCH mechanism designed to protect the machine from possible damage should the sewing machine "jam" from a thread lock up or broken needle striking the rotating hook point.

High quality sewing machine designed for a full day of production sewing of: Upholstery, Canvas, Tarps, Leather, Denim, Nylon or other heavy fabrics.

The machine comes adjusted for size B-69 thread with a 135 x 17 # 22 needle.

• Walking Foot Machines with Standard Interchangeable 111w Style Presser Feet.
• Large Rotary Hook and "M" Size Big Bobbin.
• Thread sizes from 33 to 207.
• Forward and Reverse.
• Manual Lubrication with Oil Reservoir to Lubricate the Rotating Hook.
• Extremely Quiet and Reliable Operation.
• Maximum Stitch Length 2.5 stitches/inch. Extremely Long.

618-1 D2
Compound Needle Feed, Walking Foot Sewing Machine, with Big "M" Size bobbin, Rotating Hook and Reverse Feed.

The 618-1 D2 is a highly efficient "state-of-the-art" machine, The Ho Hsingg HVP motor system is completely programmable and will stop the machine, every time, with either the needle in the down or needle up position. Automatically position the needle, and programmable stitch counter and pattern selector control panel. Includes an electric presser foot liter.

• Walking Foot Machines with Standard Interchangeable 111w Style Presser Feet.
• Large Rotary Hook and "M" Size Big Bobbin.
• Thread sizes from 33 to 207.
• Forward and Reverse.
• Manual Lubrication with Oil Reservoir to Lubricate the Rotating Hook.
• Extremely Quiet and Reliable Operation.
• Maximum Stitch Length 2.5 stitches/inch. Extremely Long.

1797 AB, 797 AB, 797 AB-8001 and 797 AB NS

The 797 series Are machines is know as a Drop Feed Walking Foot Sewing machine with an internal automatic lubrication system (pump type). All of the walking foot machines in the series include a completely adjustable differential type upper feeding system. This system allows the machine to add additional "fullness" to a seam or adjusted in the opposite direction to pull the fabric to reduce potential fabric "sheering" and lay a flat seam.

The 797 LTHR series are designed to stitch lighter weight upholstery type fabrics, and leather with heavier threads. The 797 LTHR series are smoother to operate, much quieter than other walking foot machines and will sew up to 3/8" of leather or textiles.

The 797 LTHR series uses alternating presser foot walking foot machine to sew two or more layers of fabric or leather with an equal distant stitch length and to greatly reduce the chance of ply slippage. The 797 LTHR series are more popular in Europe and Asia for automobile and furniture upholstery and this type of machine system is easier to learn to sew with and is not as costly as a compound stitcher.

The 797 LTHR series is recommended for stitching light to medium weight leathers and fabrics. One would chose The 797 LTHR series of walking foot sewing machines to stitch leather gloves, leather jackets, and garments, chaps, chinks, jeans, draperies, lighter canvas products, light webbing, light weight tents, awnings, belting, wallets, check book covers, book jackets, upholstery and leather products from a thickness of a piece of paper up to 3/8" in overall thickness.

Contact for additional information concerning your product application needs.

1797 AB

The 1797 Walking Foot Upholstery Machine, Drop Feed, Big Bobbin Hook with Reverse Feed. Fully Automatic Lubrication with a Pressure Oil Pump and an Aluminum Alloy Oil Pan. The 1797 AB will sew a perfectly flat pucker less seam.

A high quality sewing machine designed for a full day of production sewing of: Upholstery, Canvas, Tarps, Leather, Denim, Nylon or other heavy fabrics.

Thread sizes from 33 to 138.

The machine comes adjusted for size B-69 thread with a 135 x 17 # 22 needle.

• Large Rotary Hook with Big "M" Size Bobbin.
• Reverse Feed Mechanism & Oil Flow Sight Glass.
• Machine Manufactured to the Highest Japanese Mitsubishi company standards.
• Interchangeable Presser Feet with Juki 141, Brother 797, Chandler 337, Nakajima 181L, Mitsubishi DY350, LY3300 and others.

• Adjustable Height Presser Foot Walk Device to Climb over Heavy Obstacles.
• Sews up to Fabric with 7/16" Presser Foot Lift.
• Up to 3.5 stitches per inch.
• Sews up to 2,200 SPM.
• Clearance needle to vertical arm is 13". Height is 6" clearance from the bed to the horizontal arm.

797 AB NS

797 AB NS Stitching Machine Drop Feed, Big Bobbin Hook with Reverse Feed and Speed Reducer. Adjustable Height Presser Foot Walk Device to Climb over Heavy Obstacles. Sews up to 7/16" Leather or Fabric with 7/16" Presser Foot Lift. Up to 3.5 stitches per inch.

A New Updated Model Very High Quality Walking Foot, Adjustable Height Presser Foot Walking Device to Climb over Heavy Obstacles, Front Foot Lifter. New and Improved Model of 797 AB Leather Stitching Machine Drop Feed Leather Stitching Machine with a Big "M" Bobbin Rotating Hook, Including an Automatic Oil Lubrication System with Reverse Feeding for Back-Tacking. For Sewing: Chaps, Chinks, Belts, Holsters, Check Book Covers, Wallets, Day Planners, Vests, etc. (See 797 AB NS LTHR)

Controllable Stitching Speeds up to 190 SPM when equipped with the Artisan SR-2 Speed Reducer.

• The Machine Sews Leather more than 3/8" and has a 5/8" Presser Foot Lift.
• The Maximum Thread up to size 138.
• New style front presser foot lifter and a dial adjustment for the presser foot walk height.
• A Dial Type Stitch Length Regulator Adjusts to 3.5 stitches per inch.
• Optional Presser Feet are Available.
• Controllable Stitching Speeds up to190 SPM when included with the Artisan SR-2 Speed Reducer.
• Recommended Needle: Schmetz 135 x 17 #18 to #24
• Uses thread up to size 207 maximum.
• Automatic Oil Lubrication System.
• Changeable to 190 R style needle.
• Optional Presser Feet are Available.

4400 RB

The 4400 & 4420 Series of heavier duty machines know as compound Needle Feed Walking Foot Sewing Machines. All of the machines are designed to stitch upholstery type fabrics, leather and heavier threads.

The purpose of a compound needle feed walking foot machine is to sew two or more layers of fabric or leather with an equal distant stitch length and to greatly reduce the chance of ply slippage. In North America, this is the most popular sewing system for automobile and furniture upholstery.

The 4400& 4420 Series is also recommended for stitching light to medium-heavy leathers. One would choose this style of stitcher for sewing banners, tarpaulins, canvas products, webbing, tents, awnings, belting, hand bags, cases, and all manner and kind of products form the thickness of a sheet of paper up to almost 7/16" of textiles and thread up to size #207 or lager with special adjustments.

The standard models include a fully automatic lubrication system and sew up to 2200 spm on upholstery fabrics. All of the 4400& 4420 Series machines use a large Bobbin, Horizontal Axis Rotating Hook with a "U" size bobbin.

Contact for additional information concerning your product application needs.

• Interchangeable Presser Feet with Singer 111W, 211W, Consew 255RB, Juki LU-563 and others.
• Reverse Feed.
• Automatic Lubrication.
• Speed Reducer.
• Fully Automatic Lubrication with Pressure Oil Pump & Alloy Oil Pan.
• Double Capacity Rotating Hook, Drop-in Bobbin, Vertical Axis.
• 5/8 inch (16mm) Maximum Foot Lift.
• Extra Long 36mm Needle Stroke.
• Maximum Stitch Length is up to 3 stitches per inch.

4400-25 Very Heavy Duty Compound Needle Feed, Walking Foot with Extra Large Drop-in Bobbin, Reverse Feed.

• 25" Long Working Area including a "Safety Clutch" mechanism.
• Interchangeable Presser Feet with Singer 111W, 211W, Consew 255RB, Juki LU-563 and others.
• Manual lubrication system.
• Double Capacity Rotating Hook, Drop-in Bobbin, Vertical Axis.
• 5/8 inch (16mm) Maximum Foot Lift.
• Extra Long 36mm Needle Stroke.
• Maximum Stitch Length is up to 3 stitches per inch.

4420 RB

4420 RB A double needle lock stitch machine including a "Safety Clutch" mechanism designed to protect the machine from possible damage should the sewing machine "jam" from a thread lock-up or a broken needle strike the rotating hook point. Very Heavy Duty Compound Needle Feed, Walking Foot Upholstery sewing machine, with extra large drop-in bobbin. 1/4" gauge.

• Interchangeable Presser Feet with Singer 112W139, 212U539, Consew 339RB, Juki LUH521 and others.
• Reverse Feed.
• Fully Automatic Lubrication with Pressure Oil Pump & Alloy Oil Pan.
• Double Capacity Rotating Hooks, Drop-in Bobbin, Vertical Axis.
• 5/8 inch (16mm) Maximum Foot Lift.
• Extra Long 36mm Needle Stroke.
• Maximum Stitch Length is up to 3 stitches per inch.
• Standard 1/4" or 3/8" Needle Gauge. Other sizes optional.

4420-25 Very Heavy Duty Compound Needle Feed, Walking Foot with Extra Large Drop-in Bobbin, Reverse Feed.

• 25" Long Working Area.
• 1/4" Gauge Standard. Other gauges are optional.
• Interchangeable Presser Feet with Singer 112W139, 212U539, Consew 339RB, Juki LUH521 and others.
• Manual lubrication system.
• Double Capacity Rotating Hook, Drop-in Bobbin, Vertical Axis.
• 5/8 inch (16mm) Maximum Foot Lift.
• Extra Long 36mm Needle Stroke.
• Maximum Stitch Length is up to 3 stitches per inch.

2618-1B

The 2618-1B "Cylinder-Bed" Lockstitch machines are normally used in the production of hand bags, purses, footwear, upholstery, caps, and orthopedic products.

The 2618-1B Cylinder Bed sewing machines are mostly used to reach into smaller places where a flat bed sewing machine is just not practical. This model is a Compound Needle Feed Walking Foot with Reverse feed. Uses a Big bobbin Rotating Hook and a size "M" bobbin.

On top of the The 2618-1B is a dial operated knob. When turned from a smaller number to a large number, the step of the presser foot is increased. This feature causes the machine to step up to an obstacle and then to walk over the seam or welt cord or obstacle. The presser feet lifting lever is placed on the front of the machine making lifting the feet by hand far simpler than pervious models.

Contact for additional information concerning your product application needs.

The 2618-1B model is designed for a full day of production sewing of: Upholstery, Canvas, Tarps, Leather, Denim, Nylon or other heavy fabrics. The 2618-1B sews from a piece of paper thickness up to a little over 3/8" of leather compressed. the machines will easily sew from size 33 up to 207 threads.

The 2618-1B Cylinder Arm Compound Needle Feed, Walking Foot Sewing Machine mechanism reduces ply slippage and produces equal distant stitches on automotive upholstery, leather, webbing, and heavy products. The 2618-1B is primarily designed for auto trimmers, artisans, leather-crafter's, upholsters, and industrial sewing operations. We recommend the machine for sewing light to medium-heavy weight leathers and upholstery type fabrics.

• Walking Foot Machine with Standard Interchangeable 111W Presser Feet.
• Reverse Feed.
• Adjustable Height Presser Foot Walk Device to Climb over Heavy Obstacles.
• Large Rotary Hook and "M" Size Big Bobbin.
• Drop-in Large Bobbin.
• Sewing speed up to 1,800 spm.
• Sews up to 3/8" thickness of Leather or Fabrics.
• Standard needle sizes 135x18 or 135x23.
• Manual Lubrication with Oil Reservoir to Lubricate the Rotating Hook.
• Extremely Quiet and Reliable Operation.
• Maximum Stitch Length 2.5 stitches/inch. Extremely Long.
• Handles thread up to 207.

2698-1

2698-1 is a Cylinder-Bed, Compound Needle Feed, Walking Foot “Scuff” Feed Machine with a “L” size Bobbin and Rotating Hook. Synchronized Binder System, Reverse Feed for Back-Tacking. The Machine Sews up to 3/8” with a 9/16” high presser foot lift. Available with the EP Pedestal Motor Drive Unit and SR-2 Speed Reducer. For Stitching: Binding on Hats, Bags, Wallets, Webbing, Canvas, Boots and Shoes and many other products. The machine is designed to apply tape or ribbon binding to the edge of fabrics.

• Sews Thread from size z-33 to z-138.
• Recommended Needle: Schmetz 135 x 16 #18 to #23 TRI.
• PFAFF STYLE FITTINGS.
• Built-in Bobbin Winder.

TORO 3000, TORO 4000 R and TORO 4000 P

TORO-3000, and 4000 series machines are Compound Needle Feed, Walking Foot Cylinder Bed Lockstitch Sewing Machines. The stitchers are designed to sew medium-heavy to extra heavy weight products with an adjustable length stitch regulator, oscillating shuttle, and a reverse feed mechanism.

All of the models use the same #794 needles, bobbins and replaceable spare parts. The heavy stitchers are designed to sew from a very short stitch length, up to 2 stitches per inch or about 12mm long.

Most of these machines are for stitching on medium-heavy to extra heavy leathers such as saddles, harness, heavy and light tack, chaps, chinks, cases and bags. Manufactures are currently using these models for sewing a decorative stitch on highly decorative fashion denim Jeans.

Others are utilizing the TORO series for stitching specialty filters, anti-mine apparel, flack jackets, small arms protection vests and blankets. Some use the TORO-4000 series for producing high temperature blankets to keep industrial machinery warm in extreme climates.

Contact for additional information concerning your product application needs.

TORO 3000 The first affordable real holster, harness, chap, saddle and light/medium to extra heavy leather stitching machine for both professional and novice leather crafter's. All TORO 3000 leather stitchers include our custom EP pedestal drive unit with a 110 volt ESM-400-2 DC electronic servo motor with an SR-2 speed controller.

• Sews up to 3/4" of Leather.
• Extra Heavy Duty 9" Long Cylinder.
• Sews Size 138 up to 346 Thread.
• Recommended Needle: Schmetz 794.
• Sews Forward and Reverse by Lever Operation.
• Presser Foot Lift: 1 1/16".
• Traditional Style Bobbin Winder.
• Halogen Lamp.
• Maximum Stitch Length: 3 Stitches per inch.
• Maximum Sewing Speed: 150 SPM.

TC-0818
TC-0818 Flat Bed Work Platform

Optional Flat Bed Work Platform for either a TORO-3000 or TORO-4000 Model

Shown with TORO-3000 SOLD Separately

TORO 4000 R Extra Heavy Duty Cylinder Arm, Compound Needle Feed, Walking Foot Harness & Leather Stitcher with 16 1/2 " Long Cylinder Arm.

• Sews up to 3/4" of Leather.
• 16 1/2" Long Cylinder.
• Built in Bobbin Winder.
• Sews Size 138 up to 346 Thread.
• Sews Forward and Reverse by Lever Operation.
• Foot Operated Presser Foot Lift to 1 1/16 inches.
• Stitch Length up to 10 mm Long.
• Quiet and Reliable Production Performance.
• Available with either Our EP pedestal motor drive unit or our heavier duty Ped-600 motor drive.

TORO 4000 P The Professional Model TORO-4000 P is designed for heavy production sewing and is also a Extra Heavy Duty Cylinder Arm Needle Feed, Walking Foot Harness & Leather Stitcher 16 1/2" Long Cylinder Bed With Heavy Duty Adjustable Pedestal Stand & SR-2 Speed Reducer. This top-of-the-line TORO 4000 P model is manufactured to higher standards necessary for continuous production sewing and at higher operating speeds.

• Sews up to 7/8" of Leather.
• 16 1/2" Long Cylinder.
• Built in Bobbin Winder.
• Sews up to Size 415 Thread.
• Schmetz Needle 794 S.
• Sews Forward and Reverse by Lever Operation.
• Spare Parts are Interchangeable with "Juki" TSI-441.
• Also available on the heavy duty PED 600 motor drive unit.

TORO 4000 LA-25 The Professional model TORO-4000 LA-25 has a SUPER LONG 25 " working area and is intended for heavy production sewing. This machine is a Compound Needle Feed Walking-Foot Stitching Machine designed to sew Leather, Webbing, Canvas, Filters and any Heavy Fabrics from about 1/16" up to 7/8" thick with an adjustable stitch length lever and reverse feed for back-tacking. This top-of-the-line TORO model is manufactured to the highest quality standards for continuous production sewing.

• Cylinder arm with Large Shuttle Hook.
• Most spare parts are interchangeable with the "Juki" brand model TSC-461.
• Many special optional needle plates and presser feet are available.
• Available only with the LA-25 Extra Heavy Duty Pedestal system.

   

  Contact for additional information concerning your product application needs.

TORO 4000 LA-37

models TORO 4000 LA-37, machine is Heavy Duty Long Arm Cylinder Bed Lockstitch Sewing Machines. The stitchers are designed to sew heavy weight products with an adjustable length stitch regulator, oscillating shuttle, and a reverse feed mechanism. Both models use the same #794 needles and bobbins. The heavy stitchers are designed to sew from a very short stitch length up to 3 stitches per inch.

The TORO-4000 LA stitchers are intended for stitching on medium-heavy to extra heavy weight textiles and leathers such as golf bags, saddle pads and blankets. The long arm machines are also used for stitching high temperature blankets to keep industrial machinery warm in extreme climates and for stitching and quilting very large ordnance protective blankets and shields. Available only with the LA-37 pedestal system.

Contact for additional information concerning your product application needs.

TORO 4000 LA-37 The Professional model TORO-4000 LA-37 has a SUPER LONG 37" working area and is intended for heavy production sewing. This machine is a Compound Needle Feed Walking-Foot Stitching Machine designed to sew Leather, Webbing, Canvas, Filters and any Heavy Fabrics from about 1/16" up to 7/8" thick with an adjustable stitch length lever and reverse feed for back-tacking. This top-of-the-line TORO model is manufactured to the highest quality standards for continuous production sewing.

• Cylinder arm with Large Shuttle Hook.
• Available only with the LA-37 pedestal system.
• Most spare parts are interchangeable with the "Juki" brand model TSC-461.
• Many special optional needle plates and presser feet are available.

TORO 4500

TORO 4500 Extra Heavy Duty Compound Needle Feed Walking Foot, Drop Feed Flatbed Leather Stitching Machine with Reverse. The TORO 4500 Designed for the serious saddle maker or craftsperson. built for stitching all types of tack such as; Saddle Skirting, Bridles, Breast Collars, Harness, Gun belts, Saddle Bags, Heavy Nylon Belting, Slings, Webbing, Bio-Plastics, Luggage, Cases, Canvas, and any leather or similar product up to a full 7/8 inch thickness. The TORO 4500 reverse leaver allows back tacking to lock in your beginning and or ending stitches.

The TORO 4500 machines are installed on the Extra Heavy Duty motor drive unit including lockable caster wheels. For your comfort the table top height is fully adjustable. The drive unit include the heavy duty table top, SR-2 two speed ball bearing speed reduce controller and our ESM-400 Electronic D.C. Servo Motor. The TORO 4500 system allows stitchers the ability to sew just one stitch at a time, stitch by stitch, or sew at a safe controllable sewing speed of up to about 160 spm. Higher speeds up to about 680 spm or more is accomplished using the second larger pulley on the SR-2 speed controller and the high speed switch of the Servo Motor.

The TORO 4500 leather stitchers are a quality Flat Bed walking foot compound needle feed lockstitcher with a large barrel shuttle and will sew from size #99 bonded thread up the the heaviest #6 cord threads size #415.

For the best stitching performance, we recommend using only quality Schmetz brand #794 S or D needles and quality "Premium Performance" leather stitching threads from Linhanyl.

Contact for additional information concerning your product application needs.

• Sews from 1/16" up to 7/8" thick.
• Reverse Feed.
• Adjustable stitch length from 0 to 10 mm long 2.5 stitches per inch.
• Most spare parts are interchangeable with the "Juki" brand model TNU-243.
• Many special optional needle plates and presser feet gauge sets are available.
• Recommended Needle: Schmetz 794 NM 160 to 250.
• Quiet and Reliable Production Performance.
• Sewing speeds up to approximately 700 spm.

TORO 4600 & 4700

TORO 4600 & 4700 Very Heavy Duty Walking Foot, Drop Feed Flatbed Leather Stitching Machine with Reverse.

The quality TORO 4600 & 4700 series flat bed sewing machines are designed to stitch from medium heavy to extremely heavy fabrics and leathers. The machines are built for stitching all types and weights of Webbing, Canvas, Bio-Plastics, Leather and coated fabrics for such products as slings, straps, belting, tie downs anchors ropes, tents, awnings, filters, cases, tarpaulins and luggage.

The TORO 4600 & 4700 models are normally installed on a heavy duty motor drive unit which includes lockable caster wheels, our heavy duty plywood core table top, adjustable heavy duty double "T" style legs, halogen lamp, SR-2 speed controller, ESM-400-2 D.C. electronic servo motor and accessories.

For ergonomic comfort and efficiency, the table top height is fully adjustable for sitting or standing. The system includes our energy saving two speed 400 watt ESM-400-2 D.C. Electronic Servo Motor and is available for either 110 or 220 volt single phase electricity.

The TORO 4600 & 4700 system offers stitchers the ability to sew one stitch at a time, stitch by stitch, or up to a safe and controllable sewing speed of 400 stitches per minute. Changing to the larger of the two pulleys on the SR-2 controller and the high speed setting of the ESM Servo Motor raises the maximum available sewing speed up to about 800 stitches per minute. The TORO 4600 & 4700 drop feed walking foot lockstitcher has a large Titanium coated barrel shuttle.

Contact for additional information concerning your product application needs.

TORO 7334

TORO 7334 model is an Extremely Heavy Duty Flat Bed Alternating Feed Walking foot Stitching Machine with Reverse.

The TORO 7334 is designed to sew heavy to extremely heavy textiles such as Webbing, Belting, Harness, Tarpaulins, Buffing Wheels, Canvas, and Heavy Textiles up to 1 1/4" thick and up to size 554 threads.

The TORO 7334 is similar to a Singer 7 class with the extra large bobbin and shuttle hook. Most of the spare parts are interchangeable with a 7-33 Singer and a Consew 733-5. The TORO 7334 has a working area of 16 1/2".

Contact for additional information concerning your product application needs.

TORO 7334
TORO 7334 is a Extremely Heavy Duty Walking Foot Stitcher. Long Arm Flat Bed. The TORO 7334 alternating walking presser foot are mechanically driven and produce an equal distant stitch sewing in a forward or reverse direction.

The TORO 7334 machine will sew very short stitches up to an amazing 1 3/4 stitches per inch. The TORO 7334 uses the largest bobbin with the most thread capacity available and will easily stitch textiles or webbing up to 1 1/4" thick.

• Sewing Capacity: 1/16" to 1-1/4" Thick.
• Needle Bar Stroke: 2-1/2".
• Sewing Speed: Up to 585 Stitches per Minute.
• Working Area: 16-1/4".
• Recommended Needle: Schmetz 1000 or 1000H.

300 U1C is a Heavy Duty Flat Bed, Needle Feed and Walking Foot, Double Locked Chain stitch Sewing Machines. Automatic Lubrication, Adjustable Stitch Length Regulator. Spare parts interchangeable with Singer 300U.

300 U 1C is a Single Needle Compound Walking Foot, Needle Feed Machine. 300 U 1C designed to sew heavy fabrics for canvas, tents, awning, banners, tarps, flags, etc. Recommended Needle: Schmetz 62 x 57 or 62 x 59.

SPECIAL ORDER

Contact for additional information concerning your product application needs.

• Semi Automatic Lubrication.
• Adjustable Stitch Length Regulator.
• Spare parts interchangeable with Singer 300U.
• Recommended Needle: Schmetz 62 x 57 or 62 x 59.